Addressing the threat of non-compliant pumps
Published: 06 October, 2016
Pumps that do not comply with UK and European standards entering the UK are a major concern to the pump industry, and their use is fraught with risk. Peter Reynolds, president of the British Pump Manufacturers Association, explains what is being done to tackle the problem.
Our final exit from the EU is still some time away, and there are many questions that still need to be addressed. A key factor regarding the success of the ‘vote to leave’ camp was that it was perceived that this would give us the ability to better control our borders. This heightened protection is seen as offering us the opportunity to control immigration — but this factor is only one small element within the bigger border-control picture.
Take pumps for example. They may not be the first things you think of as a target for non-compliance issues. However, pump specialists in the UK which are part of the British Pump Manufacturers Association (BPMA) have been in active dialogue for over three years about such imports with the NMRO (National Measurement & Regulation Office), the authority accountable for such matters.
In recent years, market surveillance has been a key element in terms of delivering a fair and efficient EU internal market and to ensure that products placed on the market complied with EU regulations and did not pose any safety or environmental threats for users and the public at large. All of this was designed to ensure a level playing field/fair competition on the market — as well as safeguarding the coherence of the European regulatory framework, the consistency of which depends on effective enforcement.
In the UK the responsibility for protecting us from non-compliant imports falls to the National Measurement & Regulation Office, the role of which is to simplify technical regulation for the benefit of British business. The BPMA approached them the NMRO with growing evidence relating to the presence of illegal pump imports entering the UK from other countries, especially Asia, back in 2013. The BPMA, supported by CEOs from prominent member companies, met with senior management of the NMRO and then subsequently the Better Regulation Delivery Office (BRDO) in its role as sponsors of the NMRO to encourage them to take appropriate action in market surveillance on circulator pumps.
To date, despite a variety of approaches, both directly and indirectly to the NMRO and the BRDO, the situation remains unchanged, with no specific plan to remove illegal products from the market; indeed, there would appear to be no cohesive methodology to clearly identify rogue imports.
There are many concerns regarding these non-compliant products being available within our market as they have the capacity to cost bona fide companies millions of pounds in lost revenue, thus placing jobs and hard-earned reputations at risk. Another area of real concern relates to safety, as without proper testing pumps could present a safety risk.
The BPMA will, however, not be giving up in seeking action and is currently using a range of approaches to key figures within the newly formed Government to actively engage them in this debate.
Market surveillance is an important subject and one that is likely to come under increasing scrutiny. Moving forward, we need a plan to protect our industries, reputations and borders from the unscrupulous exploitation of companies to which standards are irrelevant. This stance may not be as headline grabbing as stopping people at our border crossings, but it has the potential to make a fundamentally more significant difference.
Pumps, on the face of it, may not seem to be an obvious area of concern. However, their importance is evident all around us — not only in maintaining internal ambient temperatures, but also in keeping the wheels of industry turning, delivering sufficient clean water to where it is needed and removing wastewater from where it is not. Protecting us from rogue pump imports is only one factor within this Brexit bigger picture. However, if we were unsuccessful before the vote, how can we ensure that we are protecting our borders successfully moving forward?
We all need to start being more responsible for the areas within which we can have influence — such as ensuring the provenance of any pump systems that we are specifying or purchasing. The BPMA is committed to bring pressure to bear on all the agencies charged with maintaining standards for the greater good, but we need the support network to function properly in order to ensure that we are ready to take advantage of all the new opportunities that await us.
The BPMA celebrates its 75th anniversary this year and remains resolute and committed to putting pump excellence on the national agenda.
Peter Reynolds is president of the British Pump Manufacturers Association and managing director of Grundfos Pumps in the UK.
- 23 March, 2017Pump Industry Awards
- 29 March, 2017, 9:30Data centre design and energy effiicency
- 31 March, 2017Annual awards of the Commissioning Specialists' Association - closing date for entries
- 11 May, 2017BCIA Awards 2017
- 17 - 18 May, 2017PHEX+
- 23 - 24 May, 2017Edie Live
- 15 June, 2017 - 23:55CSA Awards
- 12 - 14 September, 2017The Energy Event
- 22 - 23 November, 2017EMEX
- 23 - 25 January, 2018HVAC & Refrigeration Show