System Hygienics carries out safety checks of fire dampers for two hospitals

System Hygienics, ductwork, fire dampers
The ultimate consequence of faulty fire dampers could be the total loss of a building.

Following a successful survey of fire dampers in the Royal Bournemouth Hospital, System Hygienics was also referred to Poole Hospital. According to Robert Cornish of System Hygienics, Both hospitals were unsure how many fire dampers their buildings contained and where they were, but they were both keen of locate them and assess their effectiveness.

System Hygienics used its extensive experience and knowledge in fire safety to not only locate the fire dampers but also inspect, assess, produce a photographic record, test them and provide recommendations.

Robert Cornish explains, ‘We follow the ductwork routes physically through the building and locate the fire dampers visually where they are installed. Normally they are above an internal firewall, so we have some clues and we know what we are looking for. Plus, if one has failed and it has dropped, this often leads to a lack of ventilation in the room.’

Among legislation relating to fire dampers is the Health Technical Memorandum HTM 03-01, which gives very clear guidance that all fire dampers should be tested at regular intervals not exceeding two years. Spring-operated dampers should be tested every 12 months and at even greater frequencies if in a dust-laden environment.

In addition The Regulatory Reform (Fire Safety) Order 2005 places a duty of care on the building owner to take such general precautions as well ensure, so far as reasonably practical, the safety of the building and people within it — including the maintenance of systems.

For more information on this story, click here: May 2012, 131
Related links:
Related articles:



modbs tv logo

Lighting the way

Halesowen College has set a sustainability example for higher education institutions by installing smart lighting as part of its latest environmental initiative, making up to 85% energy savings compared to the previous system.

BESA updates HIU Test Standard

The Building Engineering Services Association (BESA) has announced an important update to its UK Heat Interface Unit (HIU) Test Standard, further strengthening performance benchmarks and supporting the sector’s readiness for incoming heat network regulation.