What Executives Should Ask Before Investing in Battery Energy Storage

RSE1

Battery storage is now a capital decision for many UK businesses, weighed against plant upgrades and new sites rather than treated as an energy side project. Last year, global operational battery storage capacity passed 250 GW and overtook pumped hydro for the first time. The UK is one of the markets leading that growth.

For leaders with budget authority, the question has moved on from whether the technology works. What matters now is whether a specific project will earn its keep. That depends on site load, grid position, the revenues available and how the asset is owned and run. This article looks at the factors that separate a strong investment from an expensive one.

Why storage has moved onto the boardroom agenda

Energy has become a strategic risk rather than an overhead. Wholesale prices remain volatile, and businesses that lived through the 2022 price spike have little appetite for that exposure again. Battery storage gives a site some control over when it draws from the grid and what it pays.

Grid access is the second pressure. Connection queues for new capacity stretch to several years in parts of the UK network. That holds back expansion plans and electrification projects such as fleet charging or heat pumps. A battery can help a site live within its existing connection by smoothing peaks instead of requesting more import capacity.

Carbon reporting adds a further consideration, boards now answer to investors and customers on emissions. Storage makes it easier to use more on-site renewable generation rather than exporting it cheaply at midday.

Stacking value beyond simple cost savings

Few battery projects justify themselves on a single revenue stream. The business case usually rests on combining several, with the battery switching between duties as price signals and site needs change.

Peak shaving is often the foundation. By discharging during the most expensive network charging periods, a site can cut a meaningful share of its distribution costs. Energy arbitrage builds on this. The battery charges when wholesale prices are low, overnight or during periods of high renewable output, then supplies that energy when prices rise.

Flexibility markets add income that is independent of the site's own consumption. Balancing services procured by the National Energy System Operator pay assets to respond quickly to grid conditions, while the Capacity Market rewards availability during periods of system stress. Some distribution network operators also run local flexibility tenders. Frequency response revenues have compressed as more batteries have entered the market, so prudent cases treat trading income as upside rather than the core.

Resilience is harder to put a number on but matters to any operation where downtime is costly. A battery sized for backup can keep critical loads running through short outages. Paired with on-site generation, it can support longer periods of islanded operation.

The real skill lies in prioritising these uses. An optimisation platform that trades the battery automatically across markets will usually outperform a fixed schedule, and its track record deserves as much scrutiny as the hardware.

Pairing storage with on-site generation

Storage delivers most when it works alongside generation the site already owns or plans to install. Solar PV is the obvious partner, since a battery captures midday surplus that would otherwise be exported at low value. Combined heat and power is a less discussed but highly effective pairing.

A CHP unit runs most efficiently at steady output, matched to the site's heat demand. Electrical demand rarely follows the same profile. A battery absorbs the mismatch, storing electricity when generation exceeds demand and topping up supply when demand spikes. The engine can then run at its optimal point for longer, which improves fuel efficiency and reduces wear from frequent load changes.

The combination also strengthens resilience. Specialist providers of battery energy storage systems increasingly design integrated schemes where the battery gives instant response during a grid failure while the CHP picks up sustained load. For hospitals and continuous-process manufacturing, that integration alone can justify the investment.

Designing generation and storage as a single scheme, with shared controls and one view of site energy, produces better results than bolting a battery onto existing plant as an afterthought.

What to scrutinise before committing 

Executives do not need to master cell chemistry, but they should press suppliers on the points that decide long-term returns.

Sizing comes first. A battery should be specified from half-hourly consumption data covering at least a full year, not from rule-of-thumb ratios. Oversizing ties up capital in capacity that rarely cycles, while undersizing leaves value on the table. Ask to see the modelling and the assumptions behind it.

RSE2

Degradation and warranty terms deserve close reading. All lithium-ion batteries lose capacity over time, and the rate depends on how hard they are cycled. A warranty that guarantees retained capacity after a set number of years is worth more than one tied to throughput limits the operating strategy may breach. Check whether augmentation, meaning modules added later to restore capacity, is planned and cost.

Chemistry affects safety and lifespan. Lithium iron phosphate has become the standard choice for stationary storage because it is more thermally stable and tolerates more cycles than nickel-based alternatives, though it is less energy-dense.

Grid connection can make or break the timeline. Even behind-the-meter systems may need approval from the distribution network operator, particularly if they will export. Early engagement saves months.

Operations and maintenance should be agreed before contract signature. Establish who monitors the system and what availability the provider will guarantee, including response times for faults.

Ownership models and the business case

There are broadly two routes to market. Outright purchase gives the business full control and keeps all revenues, but places capital and performance risk on its own balance sheet. Third-party ownership, often structured as energy storage as a service, shifts the upfront cost to a provider in exchange for a share of savings or a fixed fee.

Neither is inherently better. Organisations with access to low-cost capital and in-house energy expertise often favour ownership for its higher lifetime returns. Those with competing calls on capital, or little appetite for merchant market risk, may prefer a service model and accept lower returns for predictability.

Whichever route is chosen, a credible business case should show payback and internal rate of return under more than one revenue scenario. Ask for a downside case in which flexibility revenues fall sharply, and check the project still stands. Projects that rely mainly on site savings tend to hold up better under that test than those dependent on trading income.

Asset life matters too. A battery with a 15-year design life and a 10-year warranty needs a clear plan for the gap, including expected degradation and replacement costs.

Managing safety, planning and insurance risk

Safety concerns often slow approval at board level, and they deserve a direct answer rather than reassurance. Modern systems combine continuous cell monitoring with dedicated fire detection and suppression, but standards of design and installation vary between suppliers.

Look for testing against recognised standards such as UL 9540A for thermal runaway, and expect a site-specific fire risk assessment. Engaging the local fire and rescue service early is good practice and increasingly expected by planning authorities.

Planning requirements depend on scale and location. Smaller installations within existing sites may qualify for simpler consent routes, while larger systems need full planning permission. Noise from cooling equipment and separation from occupied buildings are common conditions.

Insurers will want evidence of the same safeguards. Involving the insurer at design stage avoids unwelcome surprises in premiums or cover exclusions after installation.

Weighing the decision

Battery storage can strengthen a site's energy position in ways that build over time, from lower network costs to greater freedom in expansion plans. It can also underperform badly when sized on optimistic revenue assumptions or installed without regard for how the site actually uses energy. The strongest projects start from detailed load data and treat market income with caution. They are designed around existing generation from the outset rather than added later, and that groundwork does more for returns than the choice of battery brand.

 This is a paid-for promotion for rseglobal.co.uk

 

Related articles:



modbs tv logo

Heat network confidence outpaces progress in social housing

Baxi surveyed 100 housing associations and 102 local authorities and councils responsible for managing or operating heat networks this summer, alongside in-depth interviews with five housing associations, a heat network consultant and heat network contractor.

Signify showcases F1 lighting partnership at Brackley campus

MBS Features Editor Russell Drury was among a group of journalists from across Europe invited to visit the Mercedes-AMG PETRONAS Formula One Team’s headquarters in Brackley, where Signify showcased its partnership with the team and the shared focus on innovation and sustainability.