Workshop heater burns waste wood

07 June, 2010

The Fabbri range of wood-burning workshop heaters from Euroheat can burn the waste wood that is generally available in factories and warehouses. These heaters have outputs from 20 to 410 kW and burn all types of dry wood and secondary waste wood such as broken pallets.

Wood is loaded manually through the upper large fuelling door, and ash is removed through a lower access door. Efficiency is around 83%, and heat is available 15 minutes after lighting. When the heater reaches 40°C, a large fan circulates heated air.

A 93 kW model can heat 1500 m3 and costs £4238 plus about £350 for a flue connection. Not only is the fuel free, but money is saved by avoiding the cost of disposing of it as waste.

For more information on this story, click here:June 10, 163

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine

Workshop heater burns waste wood

Related links:

Related articles: