TMV is quick to install

07 July, 2010

Douglas Delabie’s ES L-Pattern thermostatic mixing valve is said to be up to 40% quicker to install than other valves. It is designed for use with wash hand basins, showers and bidets in higher-risk and healthcare applications. This TMV enables the temperature of water to a bath to be set at a maximum temperature of 44 to 46°C to minimise the risk of scalding.

The device can be installed in line to simplify and reduce fitting time. Its L pattern and minimal joints make it appropriate for retrofit work. They are available in standard format for 15 and 22 mm connections.

The anti-scale temperature is set under the cap with an Allen key. For total safety, a cold-water failsafe check must be carried out by the installer when the installation has been completed.

These valves are BuildCert TMV3 Scheme approved and independently tested a certified to NHS Estates DO8 specification.

For more information on this story, click here: July 10, 101

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine

TMV is quick to install

Related links:

Related articles: