Ducted fan-coil units from Daikin

FCU
Daikin’s FWB range of fan-coil units is designed for ducted applications.
Daikin Europe has added a ducted model to its range of 2- and 4-pipe fan-coil units. The FWB has nine cooling capacities from 3 to 13 kW. Airflows are from 500 to 1350 m3/h, with static pressures from 50 to 60 Pa. The base 2-pipe unit is complete with acrylic-fibre filter and optionally fitted 2- or 3-way valves. An additional heat exchanger for 4-pipe operation or an electric heater bank can be added to the base unit. A very wide range of unit-selection possibilities to match varying operating sound and capacity requirements is achieved by the provision of 3-, 4-, or 6-row finned heat exchangers and single, double or triple forward bladed centrifugal fans. There are seven pre-wired fan speeds, from which three can be selected via the remote electronic controller. Special vibrating damper support to the fan assembly enables sound power levels as low as 36 dB(A) to be achieved at low speed on certain models. Up to four fan-coil units can be regulated for single control via the Daikin master-slave interface combined with the remote controller, which offers automatic fan-speed selection based on the difference between set point and room temperature.
Related links:



modbs tv logo

ECA urges careful planning amid ongoing materials shortage

The ECA is urging its Members, as well as the wider industry, to continue to exercise caution and plan as far ahead as possible on projects involving cable management systems (CMS).

George Clarke to open BESA Conference

The Building Engineering Services Association (BESA) has confirmed that this year’s National Conference will take place on November 3 and 4 and will once again be a ’virtual’ event.