Control and measuring valve optimises heat-pump COP

03 September, 2008

Taconova’s multi-purpose AV 23 Setter SD flow-measurement and setting valve provides accurate control of the water/glycol mix in heat-pump applications to optimise COP. The valve regulates and isolates flow and also provides flow measurement via a sight glass and setting scale. These valves provide accurate and fast balancing without diagrams, tables or the need for measuring devices. The flow rate is set using the flow-measurement devices. The valve has a setting scale that provides direct reading of the adjusted flow rate at the sight glass. Flow measurement is based on the principle of a baffle float with return spring, where the reading is on the bottom line of the float. The measuring device is placed in a bypass, isolated from the system flow. Through demand, the bypass is opened and closed through pressing and releasing the valve handle. An advantage of the device is that reading the flow has no influence on the main flow rate, eliminating the need for an additional shut-off device.

For more information on this story, click here: Sept, 08 166

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine

Control and measuring valve optimises heat-pump COP

Related links:

Related articles: