Call points for all applications

07 July, 2010

KAC’s range of manual call points for fire-alarm systems includes units for a vast range of applications. The standard MCP indoor version can be installed in offices, hotels and public buildings. The IP67 WCP is for use in environments where water or dust are present. Intrinsically safe units are approved for use in areas with gas and dust hazards.

There are also versions for use in process control, door release, extinguisher discharge and other applications where a manual activation method that has to be reset with a tool is required.

The MCP is the core product in the range. Modular in construction and available in break-glass and resettable versions, the units have a termination connector that enables first-fix wiring to be tested for continuity and ground faults without the call point having to be installed. Installation time is thus significantly reduced.

For more information on this story, click here: July 10, 180

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine

Call points for all applications

Related links:

Related articles: