Fire detectors for ductwork

04 August, 2010

System Sensor Europe, ductwork, fire detection

System Sensor Europe has introduced a range of fire detectors for square and circular ductwork. The InnovairFlex range consists of conventional and addressable versions using optical detectors. Both ranges are said to offer class-leading false-alarm rejection through a combination of advanced hardware and software engineering.

The design of the sensor cover enables these detectors to monitor ducts with air velocities from 0.5 to 20 m/s without an associated false-alarm risk. Both versions can have a module fitted into the unit to control ancillary equipment.

The housing is made of two hinged interconnected sections, enabling them to be installed in rectangular or square ducts.

For ease of installation, the air-sampling tubes can be installed, replaced or removed from the front or rear of the unit. There is a large termination area for cables.

For more information on this story, click here: August2010, 188

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine

&#65279;Fire detectors for ductwork

Related links:

Related articles:

Fire detectors for ductwork