Manifold mixer and pump for underfloor heating comes in one piece

14 August, 2005

To serve underfloor-heating systems with one or two circuits, IPPEC now offers an all-in-one manifold mixer and pump.

IPPEC has further developed its underfloor-heating manifolds with built-in mixer and pump. They now have a miniature single-piece all-in-one manifold mixer and pump. These units connect to the flow and return pipes from the boiler at one end and to one or two underfloor-heating circuits at the other end. A wall or floor thermostat, with or without a timer, is wired to the unit. The use of these manifolds enables the boiler to change to a higher flow temperature when its output is required to produce domestic hot water without affecting the operation of the underfloor heating.

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine