Thyristor control for heater batteries

14 August, 2005

Sontay’s new range of thyristor controllers for electric heating batteries in air-handling units.

Thyristors from Sontay for controlling electric heater batteries in air-handling units can control single- and 3-phase heating loads. Units for mounting on a DIN rail can modulate single phase from 1.5 to 6 kW and 3-phase from 12 to 18 kW. Panel-mounted versions offer 3-phase control to suit 36, 54 and 86 kW loads. They are rated at 60°C to reduce panel size and ventilation needs. These controllers have self-monitoring functions and provide signals to a BMS in the event of phase failure, over-heat or fault. All models have burst-power firing to minimise electrical noise and RFI without additional filtering.

Related links:

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.

Calendar

Submit event

Tweets by MBS_magazine