TMV3 shower is valve is cool to the touch

Douglas Delabie, TMV3 shower valve

The Securitherm cool-touch range of TMV3 shower valves from Douglas Delabie has been tested and certified by BuildCert to the NHS Model Engineering Specification D08/TMV3. The cool touch is achieved by passing the cold supply through an outer water channel before it is mixed with the incoming hot water. In addition, the water-supply inlets have thermally insulated covers. The shower temperature is factory set at 38°C and adjustable between 20 and 41°C.

To prevent scalding, the hot water is shut off if the cold supply fails. Smooth internal surfaces reduce the possibility of bio-film development.

For economy, an integrated device limits flow to 12 l/min.

For more information on this story, click here: November 10, 175
Related links:
Related articles:



modbs tv logo

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.