Steam humidifier is easy to use and service

JS Humidifiers, steam, humidification

JS Humidifiers describes the Condair CP3 electrode boiler humidifier as a very economic and reliable steam humidifier that is easy to install, use and service. Applications include offices, call centres, hospitals and production facilities. These humidifiers can use standard mains water and deliver 5 to 90 kg/h of steam to a duct or directly to a room. The launch is accompanied by a 40% trade-in deal on any steam humidifier.

All such humidifiers accumulate limescale in their boiling cylinders during operation. Easily accessible internals and a user-friendly control panel enable the Condair CP3 to be drained and the cylinder replaced in just a few minutes. Alternatively, cleanable cylinders are available which can be emptied of scale and reused.

Staged electrode use maximises the lifetime of these humidifiers. Initially, only the lower sections of the electrodes are submerged. When they become encrusted with scale, the water level is increase to expose fresh electrodes to the water.

The conductivity of the water is automatically calculated so that high levels of minerals can be reduced with partial drain-and-fill cycles.

For more information on this story, click here:  April 2012, 175
Related links:
Related articles:



modbs tv logo

More refrigerant bans possible, says government

The government could tighten up the rules that restrict the use of global warming refrigerant gases including speeding up phase-out programmes and introducing new bans, according to a spokesman from the Department for Environment, Food and Rural Affairs (DEFRA).

Baxi research suggests schools strongly support heat decarbonisation

A survey conducted by Baxi of 200 state school estates managers, consultant engineers and M&E contractors has found that while enthusiasm for Net Zero and support for low carbon heating systems in schools is thriving, persistent barriers remain.