Cal Bailey shares his hard experience of the benefits of off-site manufacture — especially for pipework.
Watts distributes energy-efficient piping system
14 July, 2007
Microflex preinsulated pipework is available in the UK through Watts Industries. It is composed of thermal insulation around carrier pipe(s) and covered by a double-skinned closed chamber jacket. These pipes can be used for distributing water for heating, cooling and hot and cold water supply services.
Taking control of commissioning
14 July, 2007
The commissioning of piped services inevitably faces time and budget constraints. Peter Rees considers how these challenges can be addressed.
Something is still bugging us to death
14 July, 2007
Peter Rose reminds us of the very real, but avoidable, risks posed by legionella bacteria.
14 July, 2007
The time taken to power flush central-heating systems can be halved using Adey’s VibraClean radiator agitator.
Andrews introduces more condensing water heaters
14 July, 2007
The ECOflo range of high-efficiency gas-fired condensing water heaters from Andrews comprises seven models with heat outputs from 35 to 79 kW and recovery rates of up to 1400 l/h through 50 K. They have storage capacities of 230 or 380 l.
Using Kingspan Tarec phenolic insulation on cold and chilled-water pipework in Coventry’s new University Hospital have solved the problem of space restrictions and helped the hospital meet stringent targets for carbon-dioxide emissions.
Keraflo extends float-valve control to larger tanks
14 July, 2007
Keraflo’s KP float-valve kits can be used with large water-storage tanks served by pipes in five sizes from 50 to 200 mm in diameters to provide full flexibility in the level of stored water. This feature is said to be particularly important in buildings with seasonal occupancy — such as universities and colleges, football stadia etc.
AquaTech pressurisation units for heating and chilled-water systems provide back-pressure and back-siphonage protection to fluid category 5, as required by the Water Supply (Water Fittings) Regulations of 1999.
O2 Dome takes centre stage with Grundfos
14 July, 2007
As part of the refitting of the Millennium Dome into the O2 venue for music entertainment and sports, Grundfos worked with M E Engineers to develop pumping solutions that used 36 pumps to provide the full range of M&E services, nine pressurisation units and two booster sets.
14 July, 2007
BSS has added a new product to its range of BOSS White jointing compounds.
Nu-Heat has made it easier for installers to direct underfloor heating tube back to the main manifold with the introduction of a 25 mm polystyrene tray.
14 July, 2007
Said to offer major advantages over steel for supplying oil to heating appliances is the Universal Petro Pipe range of polyethylene pipes distributed in Britain by Hytek. This lightweight and flexible pipe comes with a 15 year manufacturer’s guarantee.
14 July, 2007
Grundfos now offers a UK-specific disc of its WinCAPS CD-based electronic product catalogue and selection tool. It allows the user to select from product catalogues, size the most suitable pumps, choose the best replacement for a Grundfos or non-Grundfos pump and choose accessories and/or spare parts.
14 July, 2007
Simple pumping less water round a heating system at times of reduced demand can save significant amounts of energy. Britta Frank explains how.
Tectite is the fast way to make joints
14 July, 2007
A potential saving in installation time of up to 67% is claimed using Tectite Sprint push-fit fittings in plumbing and heating systems by Pegler Yorkshire.
Marflow assemblies designed to accommodate change
14 July, 2007
The key to maximising the benefits of prefabricated valve assemblies is to adopt a flexible approach with a high level of inherent configurability — according to Marflow Hydronics.
How facilities managers can help tackle climate change
14 July, 2007
CIBSE president John Armstrong believes that the wealth of knowledge owned by facilities managers is vital to meeting Government targets to reducing energy consumption and carbon emissions.
To address the skills shortage that is posing a threat to the future of the facilities-management industry, GSH is stepping up its recruitment programme for apprentices. The company already employs 65 apprentices and is planning a substantial increase.
PME secures £million-plus maintenance contracts
14 July, 2007
Two long-term contracts won by PME, the building-maintenance and facilities-services arm of Carillion are worth over £2.5 million.
The benefits of a partnership between facilities managers and building-services specialists has never been more valuable than it is today, says HVCA president Mike McCloskey.
14 July, 2007
Ian Fielder of the British Institute of Facilities Managers argues that the experience of facilities managers in operating buildings day by day has a key role to play in designing sustainability into new and refurbished buildings and delivering corporate social responsibility.
EWS is warning about the likelihood of air-conditioning systems failing during what is predicted to be a long, hot summer — unless companies take preventive action.
The major maintenance contract of Honeywell with the head office and operations centre of Wessex Water has been extended, and Wessex Water has also contracted with Honeywell to manage 12 other buildings.
12 July, 2007
When in the latter stages of last year, Sir Nicholas Stern in his review ‘The economics of climate change’ highlighted the impact on the world's GDP of climate change, there was considerable scepticism in some quarters. The spread of his predictions was very wide — ranging from unabated climate change costing the world at least 5% of GDP each year right up to over 20% if more dramatic predictions come to pass. At the very best, he believes that the impact of climate change on GDP can be limited to around 1%.
Rinnai UK launches applied products division
Rinnai is launching a new division - Rinnai Applied - which will be dedicated to the design, supply and service of larger HVAC units and systems that will meet the specific heating, ventilation, air conditioning and hot water demands of commercial and industrial premises.
Engineering services alliance welcomes government consultation on retentions and late payments
Actuate UK, the engineering services alliance, has welcomed the new government consultation on reforming cash retentions and taking legislative measures against late payments to small businesses, as part of the new Small Business Plan unveiled on 31st July 2025.
